Bluetooth Multi-Channel Hybrid Pre-Amplifier System – 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w…

Add your review

$264.99

3000-WATT POWER: The Pyle Multi-Channel Pre-Amplifier is perfect for your karaoke and home entertainment system. It gives you 3000W peak power to be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio
6 INPUTS: The digital amp box supports FM/AM radio, MP3 audio playback & other external devices. It is equipped w/ USB & SD card readers, AUX 3.5mm input, 2 ¼” mic inputs, headphone jack, RCA (L/R) audio input/output jacks dedicated for subwoofer
BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing

$264.99

Add to wishlistAdded to wishlistRemoved from wishlist 0

Features: – Home Theater Pro Audio Receiver – High-Powered Hybrid Pre-Amplifier – Multi-Channel Source Audio Selection – Built-in Bluetooth for Wireless Music Streaming – Includes (2) UHF Wireless Handheld Microphones – FM/AM Radio with Digital LCD Display – USB Flash & SD Memory Card Readers – MP3 Audio File Playback Support – Connect & Stream Audio from External Devices – Aux (3.5mm) Input Jack – (2) 1/4’’ Microphone Inputs – Headphone Jack, 1/4’’ – RCA (L/R) Audio Input/Output Jacks – Dedicated for Subwoofer Output – Screw-Type Speaker Terminal Binding Posts – Front Panel Button & Rotary Control Center – Independent Audio Source Selection – LED Backlight Illumination with Dimmer Control – Microphone Volume/Echo Control – Integrated Overload & Short Circuitry Protection – Built-in Cooling Fan – Universal Rack Mount Design Bluetooth Connectivity: – Built-in Receiver for Wireless Audio Music Streaming – Simple & Hassle-Free Pairing – Works with All of Today’s Latest Devices – (Smartphones, Tablets, Laptops, Computers, etc.) – Bluetooth Version: 5.0 – Bluetooth Network Name: ‘PYLE PRO’ – Wireless Range: 40’+ ft. What’s in the Box: – Hybrid Pre-Amplifier – (2) UHF Wireless Handheld Microphones – Detachable Rack-Mount Brackets – FM/AM Antenna/Bluetooth Antenna – Remote Control – Power Cable Technical Specs: – Power Output: 3000 Watt MAX – 900 Watt @ 2 Ohm – 450 Watt @ 4 Ohm – 300 Watt @ 8 Ohm – S/N Ratio: >76dB – T.H.D.: <1% – Radio Station Memory Presets: 30 – Digital Media File Playback Support: MP3/WMA/WAV/FLAC/APE – Maximum USB/SD Flash Memory Support: Up to 64GB – Battery Operated Remote, Requires (2) x ‘AAA’ Batteries, Not Included – Battery Operated Mic, Requires (2) x ‘AAA’ Batteries Each, Not Included – Power Cord Length: 4.5’ ft. – Power Supply: 130/230V, Switchable – Unit Dimensions (L x W x H): 19.0’’ x 12.0’’ x 3.1’’ –inches. SAFETY INSTRUCTIONS : (1) Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit. (2) When more than one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation. (3) To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted. (4) For speaker cords, strip off the vinyl coating and twist the wire tip.Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause a short circuit when wires of different terminal contact each other. (5) After the unit is turned ON, adjust the main volume to the desired level same with the bass and treble volume, etc.

3000-WATT POWER: The Pyle Multi-Channel Pre-Amplifier is perfect for your karaoke and home entertainment system. It gives you 3000W peak power to be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio
6 INPUTS: The digital amp box supports FM/AM radio, MP3 audio playback & other external devices. It is equipped w/ USB & SD card readers, AUX 3.5mm input, 2 ¼” mic inputs, headphone jack, RCA (L/R) audio input/output jacks dedicated for subwoofer
BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
FRONT PANEL CONTROL: The sound speaker amplifying device features front panel controls w/ independent audio source selection, rotary control center for microphone volume & echo control. It also features LED backlight illumination w/ dimmer control
RACK MOUNT: High powered home theater pro audio receiver features a universal rack mount design w/ built-in cooling fan & integrated overload/short circuitry protection. Includes 2 UHF wireless handheld microphones, mounting brackets & remote control

Specification: Bluetooth Multi-Channel Hybrid Pre-Amplifier System – 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w…

Product Dimensions

Item Weight

Manufacturer

Item model number

Date First Available

Brand

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Bluetooth Multi-Channel Hybrid Pre-Amplifier System – 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w…”

Your email address will not be published. Required fields are marked *

Bluetooth Multi-Channel Hybrid Pre-Amplifier System – 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w…
Bluetooth Multi-Channel Hybrid Pre-Amplifier System – 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w…
Topvalidtech.com
Logo
Shopping cart